More Heat Transfer Mistakes!

Since my last post on avoiding heat transfer mistakes was so popular, I decided to continue the series. Thankfully the majority of my readers were the ones who gave me the ideas for this list. In fact, I’m kind of glad that I have written this series. It makes me feel like I’m not alone in my heat press machine struggles.

Seriously guys, using heat press machine can be very hard at times!

Here are some more heat press machine mistakes that you should avoid

#4 – Design Still Isn’t There!

One thing that a lot of people don’t know when starting off is that if you’re going to be heat transferring onto a darker colored garment you’re going to definitely need to use some kind of opaque transfer technology. A regular heat press machine is going to cut it. You need one that specifically designed with an opaque transfer technology. You’re also going to need transfer paper that’s made specifically with darker garments in mind. Without the two of these, you’re definitely never going to be able to do any kind of heat transferring onto darker garments.

#5 – Garment Has Burn Marks!

Even if you set all the settings on heat press machine correctly, things can still go wrong in your garments can still get burned. The most usual cause of this is because the temperature in the time was set incorrectly on the machine. People will purchase a new machine and then assume that their old settings will work the same on this newer machine. That sometimes not the case. That’s where we always recommend before you purchase heat press machine going check out the best heat press for vinyl reviews 2017. He press machine technology is always changing so if you’re going to be buying the best one you want to make sure to read as many reviews as you can. Some benefit of the newer heat press machines is that they reduce the chance of a garment burning because they offer a more evenly distributed heat transfer surface.

#6 – Vinyl Isn’t Staying On!

Probably the most frustrating thing that can happen when using a heat press is when the product seems to come out fine but then a few weeks later you discover that the vinyl is starting to peel off the shirt. This will usually start happening after you’ve wash the garment a couple of times. The way that I suggest to prevent this is to make sure that you’re using high-quality vinyl. Also make sure that you’re not using vinyl that’s been sitting around for a while. Finally, you’re going to want to make sure that the material that you’re doing a heat transfer onto can support vinyl. The last one is usually a rare incident but I have seen it happen.

Thanks for reading some mistakes that you need to avoid when using heat transfer machine. Of course, just to reiterate, before you make your heat transfer purchase make sure that you check out a bunch of he press machine reviews. A lot of these mistakes can be avoided if you simply purchase the correct heat press machine at the beginning.

Steven Adams

View more posts from this author